Single Srew Extruder Machine High Speed Single Screw Extrusion
Machine SJ80/33
Single Srew Extruder Machine Special features:
- Longer LD make easier and better plasticizing process.
- The inside of the barrel cast with bimetallic, screw spray alloy.
- Special feeding device, open spiral groove, large feeding quantity,
easy to replace, low cost.
- Full extruder designed in one complete system and keep the minimun
comsumption but maximum output.
- Siemens PLC controal system make operation easy and stable.
- All electric parts are world famous brand like ABB inverter,
Siemens contractor..... to keep the machine stable and longer
lifetime.
Single Srew Extruder Machine Circumstance condition
| SN | Condition | Specification | Description |
| 1 | Natural circumstance condition | Working place | Indoor use |
| Power source | No dangerous area |
| Humidity | 55%~85% no condensation |
| Temperature | 0~40 ℃ |
| 2 | Electricity source | Installation capacity | 54 kW |
| Power supply | 3P+N+PE |
| Voltage/Frequency | 380V/50Hz, others can be option |
| 3 | Cooling water | Temperature | ≤5 ℃ |
| Water pressure | ≥0.3MPa |
| Flow | ~5 m3/h |
| 4 | Air condition | Compressor air pressure | ≥0.6MPa |
| Flow | ~0.9 m3/min |
Single Srew Extruder Machine Specification
| SN | Parts name | Specification | Description |
| 1 | Extruder | Extruder model | HYSJ-60/33 single screw |
| Output | 120~140 kg/h |
| Center height | 1,000mm |
| Weight | 1,900kg |
| 2 | Control system | Detachable control panel | Siemens PLC |
| Components brand | Siemens, RKC, ABB, etc. |
| Features | 1. Cabinet is detachable, easy to install, maintain and transport; 2. With air conditioner; 3. Adopt the world famous brand electrical components, such as
Siemens, ABB, RKC Schneider, and so on. |
| 3 | Screw | Diameter | Ø60mm |
| Screw ID ratio | 33:1 |
| Material | 38CrMoAlA + special alloy |
| Finish | Nitrogen-filled (0.50~0.70mm depth) and polish |
| Max rotate speed | 107 r/min |
| Core of the screw | Auto control for temperature |
| Features | 1. German technology design, to ensure the highest output and good
good plasticizing at the same power. 2. 38CrMoAlA nitriding HV900, depth 0.4-0.6mm surface sprayed
alloy； |
| 4 | Barrel | Material | Bimetal barrel inside in two layers |
| Inside finish | Nitrogen-filled (0.50~0.70mm depth) |
| Heating control area | 4 areas |
| Heating way | Copper cooling fins with ceramic heater |
| Heating power | 15 kW |
| Cooling system | Low-noisy barrel cooling fan |
| Cooling power | 0.25kW x 4 sets |
| Features | 1. Inner casting alloy bimetal barrel； 2. Adopt ceramic heaters, high cost but fast heating, high
temperature can be controlled. |
| 5 | Gear box | Housing material | Ductile iron QT-500 |
| Gear material | 20CrMnTi |
| Gear surface | Hardened and ground in high precision |
| Axis material | 40Cr |
| 6 | Driving motor | AC motor power | 37 kW |
| AC inverter controller | Siemens brand |
Single Srew Extruder Machine HYPET PPR pipe single screw extruder
model list
| Model | 45/33 | 55/33 | 60/33 | 60/33 | 65/33 | 65/33 | 75/33 | 80/33 | 90/33 |
| Max output | 80 | 100 | 110 | 130 | 170 | 220 | 255 | 270 | 320 |
| Main motor | 30 | 37 | 37 | 45 | 55 | 75 | 90 | 90 | 110 |
Single Srew Extruder Machine Other terms
1. Single Srew Extruder Machine Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer
according to the rule.
3) Training on field operation and maintenance for customer's
personnel.
4) Provide technical consultation service on long-term basis.
2. Single Srew Extruder Machine Installation and debugging
When the machine arrives at site, the customer should install it on
the appropriate position according to the specifications provided
by the supplier; and then the supplier should send its engineers to
the site if requirement approved,in order to instruct the customer
about trial run and debugging. The customer should provide
necessary conditions for trial run and provide materials for trial
run, and should decide the processing conditions in trial run with
consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before
shipment at Seller's site. The Seller is obliged to test the
performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and
manpower for the commissioning of the order.
3) This Price does not included commission and installation in
buyer’s factory.
3. Single Srew Extruder Machine Time of delivery
1) When the contract becomes valid, the machine should be delivered
within 60 days since receipt of the advance payment. And the equipment will
be in normal operation after debugging within two weeks after
arrival.
2) During production, provided that the Buyer requests to modify
the specification of the order, the Buyer shall notify the Seller
of this modification in written form. Upon receipt of the notice,
the Seller will quote to the Buyer the cost of this modification
and notify the Buyer of any possible delay due to this
modification.
4. Single Srew Extruder Machine Guarantee clause
1) Guarantee is 1 year (excluding human factor and wearing parts).
2) Under proper working conditions, 12 months from the date of
completion of commissioning at the buyer's site, and should be at
the latest within 14 months from the issuing date of Bill of
Lading.
