SPC Floor Board Extrusion Line With Conic Twin Screw Extruder
95/192 Output 800k/H
SPC Floor Board Extrusion Line HYPET Unique Advantages
a. According to different functions and requirements, there are
four-roller and five-roller devices for selection, which can
achieve different purposes and effects.
b. Equipped with HYPET special function extruder, high output, 12
tons/day to 28 tons/day
c. Reasonable formula and technology can be provided,
d. It can be equipped with laminating, hot stamping, slitting,
stacking and packaging functions to improve the effect of automatic
control
e. The T-shaped die has multiple heating zones, which makes the
plasticization and flow rate more controllable.
f. Siemens PLC control system, equipped with HYPET self-developed
software, improves operation efficiency and reduces production
costs.
SPC Floor Board Extrusion Line The composition of the production
line
| Raw material mixer |
| 1 | Mixer500/1000 (With inverter & screw loader) | Mix all the raw material, like PVC, wood, calcium carbonate,
chemical agent | 1 set |
| 2 | Material silo 2 tons type with screw loader | To connect to mixer and extrusion lines, so the mixer no need
always working. | 1 set |
| SPC flooring sheet production line |
| 3 | HYZS80/156- 1220 SPC flooring sheet production line | SPC flooring sheet production line with screw loader | 1 set |
| UV painting production line |
| 4 | UV painting production line | To paint UV layers on flooring | 1 set |
| Cutting machines (Vertical slotting & horizontal slotting) |
| 5 | Cutting & slotting line | | 1 set |
| SPC floor bonding machine |
| 6 | EVA laminating machine | Laminating the soundless EVA parts | 1 set |
| Floor side paint patching line |
| 7 | Paint patching | After slotting paint patching | 1 set |
| Recycling machines |
| 8 | Crusher | Recycling machine | 1 set |
| 9 | Pulverizer 600 | Recycling machine | 1 set |
SPC Floor Board Extrusion Line Condition of use
| SN | Condition | Specification | Description |
| 1 | Natural circumstance condition | Working place | Indoor use |
| Power source | No dangerous area |
| Humidity | 55%~85% no condensation |
| Temperature | 0~40 ℃ |
| 2 | Electricity source | Installation capacity | 200 kW |
| Actual consumption | 160 kW |
| Power supply | 3P+N+PE |
| Voltage/Frequency | 380V/50Hz other can be option |
| 3 | Cooling water | Temperature | ≤15 ℃ |
| Water pressure | ≥0.3MPa |
| Flow | ~15 m3/h |
| 4 | Air condition | Compressor air pressure | ≥0.6MPa |
| Flow | ~0.9 m3/min |
SPC Floor Board Extrusion Line
SPC Floor Board Extrusion Line Installation and debugging
When the machine arrives at site, the customer should install it on
the appropriate position according to the specifications provided
by the supplier; and then the supplier should send its engineers to
the site if requirement approved,in order to instruct the customer
about trial run and debugging. The customer should provide
necessary conditions for trial run and provide materials for trial
run, and should decide the processing conditions in trial run with
consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before
shipment at seller's site. The seller is obliged to test the
performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and
manpower for the commissioning of the order.
3) This Price does not included commission and installation in
buyer’s factory.
